Victron Automotive IP65 Charger 12V/4A-12V/1A

Victron Automotive IP65 Charger 12V/4A-12V/1A

Charger for 12V batteries with two charge current options: IP65 Charger 12V/4A – 12V/0,8A  
Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger.

Less maintenance and aging when the battery is not in use: the Storage Mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In thestorage mode float voltage is reduced to 13,2 V to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

Protected against overheating and reverse polarity connection
The output current will reduce as temperature increases up to 40°C, but the charger will not fail. Output relay protects against reverse polarity connection.

Input voltage range - 200-265 VAC
Charge current: 4A or 0,8A
Battery connection - Black and red cable of 1,2 meter
230 V AC-connection - Cable of 1,5 meter with CEE 7/7 plug
Weight - 0,56 kg
Dimensions (h x w x d, mm) - 42x61x185

More information:

• Victron Automotive IP65 Charger 12V/4A-12V/0,8A Datasheet